Available Shapes

Alloy 5454 is available as sheet, plate, extruded shapes, rod & bar, pipe & tube.

- Top -

Typical Chemistry (% Maximum unless shown as a range)

Cu	Si + Fe	Mn	Mg	Zn	Cr	Ti	Al
0.10	0.40	0.5 / 1.0	2.4 / 3.0	0.25	0.05 / 0.20	0.20	Balance

- Top -

Characteristics

5454 is a non-heat-treatable alloy with strengths between 5052 and 5083. Formability and corrosion resistance are good and the alloy has better stress corrosion resistance than 5083 at elevated temperatures.

- Top -

Typical Applications

5454 is used in storage tanks and pressure vessels for sustained elevated temperature service, and road tankers.

- Top -

Mechanical Properties

	Tensile Strength		Yield Strength		Elongation	Brinell Hardness
	ksi	MPa	ksi	MPa	% in 2" (50mm)
5454-0	36.0	252	17.0	119	22	62
5454-H32	40.0	280	30.0	210	10	73
5454-H34	44.0	308	35.0	245	10	81

- Top -

Fabrication Guide

				Weldability
	Corrosion Resistance	Formability	Machinability	Mpa	TIG	Resist.
5454-0	A	A	D	A	A	B
5454-H32	A	B	D	A	A	A
5454-H34	A	B	C	A	A	A

- Top -